About Polishing and Waxing Products
POLISHING / WAXING
Step 1: I used the Mother's Claybar Kit to
remove all contaminents off the finish. After
use of the claybar the finish will be as
smooth as a baby's butt.
Step 2: I used a Porter-Cable orbital buffer with
Meguiar's Fine-Cut Cleaner. This will remove all
surface scratches and even some deeper
scratches that are in the clear coat.
Step 3: I hand applied the 3M Swirl Mark
Remover. This takes some hand pressure to
apply, but will remove the swirl marks
produce by the orbital buffer.
Step 4: The final step I used a Porter-Cable
random orbit buffer with Zaino Z2 Show Car
Polish. This polish provides you with a very
reflective finish.